Natural Chemistry Spa Purge (946ml) (P/N: 74140NCM)

Spa Purge attacks the root cause of most spa maintenance problems- the buildup of non-living organic waste contamination! Oils, lotions, cosmetics, hair products, and other non-living organics build up in spa water to produce cloudiness, unpleasant odors, and foaming. These contaminants collect and build up in spas, circulation systems and filters.

How to Use: Spas/Hot Tubs: Remove cartridge filter elements. With spa water temperature at 95 degrees Fahrenheit or higher and circulation running, add entire contents of bottle into the water. Run jets for a minimum of 5 minutes. Maintain water temperature at 95 degrees Fahrenheit over night and allow to circulate with jets off. Drain and rinse/clean out the surfaces of the spa. Refill the spa and reinstall filter elements. Resume to normal operation. Jetted Tubs: Fill tub with hot water 1” above jets. Add ½ a bottle of Spa Purge to the water and turn jets on for 5 minutes (some foaming will occur). Turn just off and let it sit for at least 5 hours. Turn jets on to flush the system. Drain tub and clean surface as needed.

• Helps clean non-living organic waste from inside spa plumbing using a concentrated formula with SMARTZyme technology
• Attacks the root cause of maintenance problems caused by non-living organic contamination
• Recommended use - every 3 months
• Cleans where you can't!

Pro Tip: By purging the spa, the symptoms of non-living organic contamination will be reduced or eliminated.

Size: 946 mililiters